Please select a currency

Wednesday, April 23, 2014
$499.99 each

JK Tube Flare, Front, 4" Wide, Steel

SKU TFF8700

This is the newest generation front tube fender flare from GenRight Off Road.  Designed for the Jeep JK, these tube fenders are perfect for your favorite trail.

FEATURES:

  • Made from tough steel tubing.
  • Bolts on in same location as stock flare.
  • 4" wide flare (same as stock).
  • Bigger wheel opening (up and rearward) to prevent tire rubbing.
  • 1/8" thick laser cut and CNC bent plate and tubes will hold up out on the trail.
  • Built from rugged 1-1/2" diameter x .120" wall tubing.
  • MIG Welded in a precision jig to assure a good fit.
  • Includes new hardware (some stock hardware is reused).
  • Retains your stock inner fender well.
  • Includes detailed installation instructions.
  • 100% made in USA!

NOTES:

  • Sold un-painted.
  • We have Stealth side and front marker/signal light kits available too.
  • Fenders are sold in pairs.
  • Installation requires minor drilling of the factory mounting locations.

Canadian customers: available in a powder coated finish, call 778-435-2169 for more information.

$799.99 each

JK Rear Tire Carrier, 1-3/4" Diameter Steel Tubing

SKU RTC3800

This is the New JK Steel "Swing Out" Rear Tire Carrier from GenRight Off Road.  It is sleek, simple and made of super tough steel tubing.  This Tire Carrier is designed to be completely independent of the rear bumper.

FEATURES:

  • Giant 1-3/4" diameter Steel tubing.
  • 4 point mounting is rattle free.
  • Works independent from the rear bumper.
  • Swing out tube style design.
  • Mounts to factory rear door hinges.
  • 100% MIG welded (as pictured)!
  • Designed to hold up to a 42" tire.
  • Fits any bolt pattern or wheel offset (not stock). 
  • Corrosion resistant. 
  • Fits tighter to the rear tailgate than other swing out tire carriers.
  • Improves departure angle.
  • License plate re-location mount in center of tire carrier cage.
  • Cover for factory license plate location.
  • Pre-drilled for license plate and 3rd brake light wiring.
  • Made in USA!
  • Now available with a Black Powder Coated finish (Optional).

Watch a short Video on this Product

NOTES:

  • Sold un-painted.
  • Requires drilling holes on drivers side rear panel to mount the latch plate.
  • Requires that the factory rear door hinges be removed and new GenRight pivot points installed (no new holes required).
  • If using the factory tail lights the tire carrier brackets may have to be modified to clear (simple trim to clear). 
  • This tire carrier is also available in a lightweight Aluminum version (RTC-3810).
$1,285.00 each

JK Ultimate Dana 44 CV Axle Set for Jeep Rubicon ('07 and up) With Non Stock Carrier

SKU CVJ44-JK-NSC

Compatible with aftermarket heavy duty axle housings such as TeraFlex's "JK Tera44" and Dynatrac's "ProRock 44".  Tests prove Ultimate CV Axles to be twice as strong as OEM axle shafts, and they're just as tough at a straight angle as they are at extreme angles where U-joints are weakest.

$8,249.99 each

Currie Rock Jock 60 Axle, FRONT

This is a complete Currie Rock Jock 60 FRONT Axle from GenRight Off Road. We stock this axle in a configuration that we know works best for Jeep guys on 37" to 42" tires.  We figured out a long time ago that new axles built from scratch are the way to go! You get a hi-pinion in front or rear. All the geometry (castor and pinion angle) is correct and you get Hi-Steer on knuckles that were meant to have hi-steer!

Currie uses REAL full size Dana 60 ring and pinions. 35 spline axles that are 1-1/2” diameter and super thick axle tubes. We order all axles with no brackets so they get welded on by you in the proper location that is specific to your vehicle!

These axles are also manufactured with a rotated diff cover to prevent leaking from damage on the trail.

STANDARD SPECIFCATIONS:

  • 65" wheel mounting surface to wheel mounting surface.
  • Locker Type: Air (ARB).
  • 5.38 Gear Ratio (Super 60).
  • Hi-Pinion. 
  • Disc Brakes (new Larger JK rotors and calipers).
  • 5 on 5-1/2 bolt pattern only.
  • 1-1/2" diameter 35 spline axles (Upgradeable to RCV 35 Spline or RCV 300M 35 Spline).
  • Locking Hubs.
  • Hi-Steer Knuckles with blank arms (for double sheer).
  • Machined Diff case is tapped to mount a single upper control arm (rear includes bridge).
  • Super thick axle tubes.
  • Super thick Diff cover.
  • 1350 Yoke.
  • No Control arm or Trac bar brackets on this axle.

NOTES:

  • Available in Drivers side or Passenger side "drop" (TJ & YJ are driverside).
  • This is a "bare" (no brackets) axle, as we feel it is best to position the axle first then attach the brackets in the optimum position and location for your vehicle (allowing for bigger tires or stretched wheelbases).
  • The brakes will require a "banjo" style connection that may be larger than your existing brake line.
  • If installing these on a Jeep with a steering box, you will need to order our STK-2503, STK-5750 and STK-5755 to complete the Hi-Steering on the axle / vehicle.
  • Control arm and trac bar mounting brackets are sold separatley and require welding to install them.

 

$2,195.00 each

Ultimate 300M Dana 60 CV Axle Set for Currie RockJock (Upgrade)

RCV Performance Ultimate 300M CV Axles simply replace your Currie RockJock Dana60, with a high-strength constant velocity design.

$665.00 each

JK (2007-2011) Front 1350 C.V. Heavy Duty Drive Line, 2 or 4 Door w/ Auto Transmission

If your JK is lifted more than 2" and/or you are running larger tires it is best to replace the factory "junk" driveshafts. The factory driveshafts are a boot'd CV style and the increased driveline angle with split the boot and the joint will run dry!!! These heavy duty driveshafts will not as they are good to 32 degrees.

The J.E. Reel Front 1350 C.V. Heavy Dut driveshaft is designed for stock to 6” lift applications and is rated for up to a 37” tire.

*O.E. manufactures spend countless millions of dollars and countless man hours in R&D to make sure their vehicles perform trouble free. Any changes to suspension, gear ratio, tire size and/or other modifications add additional stress and wear and tear to these vehicles and adversely affects both reliability and ride comfort. Vehicles can have problems associated with these modifications. J.E. Reel Drive Line Specialists is not responsible for any problems occurred due to installations or modifications to any vehicle.

NOTES: 
  • Other configurations are also available.
  • All drive shaft kits require special "inch" torque wrenches to install the new yokes on the axle side.

 

$1,099.99 each

JK Crawler™ Gas Tank, Rear Tank Only

SKU GST8002-2

Building your JK into the ultimate rock crawler? Then we have the tank so you can put a 4-Link rear suspension in you Jeep JK.

This is the GenRight Crawler™ Gas Tank to fit a Jeep JK (2007 - Current). It is specifically designed to REMOVE the factory tank from under the middle of the vehicle so you can run true Rock Crawling triangulated 4 link rear suspension (yes, no trac bar!).

This tank follows in a line of innovative and trail proven, top quality gas tanks produced by GenRight. 

The tank assembly is relocated to the rear muffler area and mounts in a way that still works with your factory gas filler. It even re-uses your factory fuel pump module so can work with all your factory emissions equipment so you won't get any check engine light or have computer issues.


FEATURES:

  • Hangs no lower than the factory muffler did (does not hurt departure angle).
  • 20 gallon fuel capacity.
  • Creates room for triangulated 4 link suspension systems.  
  • Mounting location keeps center of gravity low.
  • Re-uses the stock Jeep fuel pump module.
  • 1/8" thick Aluminum alloy tank is TIG welded.
  • Foam liner between tank & skid plate.
  • Includes a 3/16" thick heavy duty steel skid plate.
  • Stainless steel hold down strap.
  • Drain plug.
  • All tanks are 100% pressure tested.
  • Patent Pending.

INCLUDES:

  • Fully assembled fuel tank in a Heavy Duty skid plate.
  • New factory Mopar roll over / vent valves.
  • New tubing to adapt tank to new mounting location.
  • New cargo area floor cover (BKT-8100)

Additional NOTES:

  • Because of shape and location changes, installation of this product requires changes to the exhaust.
  • Requires removal of the rear floor tool storage area (the jack remains in the very rear compartment).
  • To install this product it does NOT require a body lift.
  • If a rear sway bar is desired, installing this tank will requires switching to a Currie "AntiRock" type rear sway bars. Because the stock sway bar must be removed.
  • Can be used with factory tow hitch.
$189.99 each

JK Slider Bar DIY Kit, 2 Door, Steel

SKU RCG8200

This is a "slider" side bar kit that can be added on to the standard rocker guard on a factory Rubicon 2 door Jeep JK.

This is a great upgrade for anyone looking to add on a "functional" step to their JK. Although this kit does reinforce the factory side protection it is only good for medium duty trail protection of the body. 

FEATURES: 

  • Can be welded onto factory Rubicon rocker guard bar under the doors.
  • Full coverage from front to rear (protects the flares too). 
  • Side bar ends are mitered (cut) at 15 degrees to angle the bar up slightly.
    Constructed of tough 1-1/2" diameter x 1/8" thick wall steel tubing.
  • Dimple die'd step plates provide good foot traction and good drainage.
    Sold in pairs (as a kit).
    Shipped un-painted and requires paint or powder coat after installation.

NOTE: Metal tubing and steps can be slippery when wet, therefore we recommend adding grip tape where necessary for better entry and exit foot traction.

$1,399.99 each

TJ / LJ / YJ / CJ EXT Stretch Package

SKU EXTPKG

This is the GenRight "EXT" Stretch Package for up to 5" of wheelbase stretch in a Jeep TJ, YJ or CJ-7.

We have taken all the guess work out of determining the proper combination of GenRight products. This package was designed to give you everything you need to stretch your Jeep up to 5" cleanly.

Don't worry, the kits are specific to each type Jeep: TJ, YJ or CJ-7.

Each kit includes: 

 

$5,995.95 each

JK 3.6L Supercharger Kit, V3 Si-Trim Stage 2 Intercooled, 280lb ft of Torque, 317 hp (at the rear wheel, dyno'd on 37" Tires)

Worlds First supercharger system for 2012 Jeep Wrangler JK equipped with the 3.6l Pentastar RIPP Superchargers are considered the easiest to install, most powerful and most reliable.

This kit features a signature Vortech V3 Si-trim Self-Contained centrifugal supercharger, an air to air front mounted intercooler behind the grill. As a whole this kit bolts on in 8 hours is considered plug and play ready. Set up at 7psi peak and tuned on 91oct fuel, the kit features larger primary injectors, plug and play RIPP map sensor and comes complete with fuel and timing tuning.

Preliminary tests show our Automatic 2012 Jeep Wrangler Unlimited producing just 189 rear wheel HP (WHP) stock. With our supercharger installed on our 2012 Unlimited Rubicon (Automatic) we have been able to safely squeeze 325WHP and 300Trq on 37in tires with all emissions and knock control features on, making it extremely safe for any form of motor-sport.

$15.99 each

Winch Recovery Bandana

Introducing the "winch-recovery bandana" .   Operation of a winch and performing vehicle recovery is inherently dangerous.  The winch-recovery bandana provides all of the needed information in a single place to perform a safe vehicle recovery.

Some of the information provided includes:

- recommended winch kit contents
- a step by step vehicle recovery plan
- winch rigging check walk-through
- rigging diagrams
- safety plan and safety rules
- a chart for estimating "stuck" load

This is the single most comprehensive winching information resource available.  It was developed by a certified 4x4 trainer with over 40 years of off-road experience.

Made out of cloth to easily fold up and put in your winch kit.  Comes in white, yellow, red, blue, green or orange.

$479.99 each

Warn VR8000 Winch

A full 8,000 lb. pulling capacity makes this winch great for lighter trucks, Jeeps, and SUVs.  Quick line speed, durable construction, and WARN dependability ensure this winch will come through time and time again.

Features:


*Legendary WARN reliability and performance; 8,000 lb. (3630 kg) capacity
*Low-profile design will fit most trucks and SUVs
*Separate control pack for various mounting options
*Exclusive brake design for superior winching control
*Durable, smooth, and reliable three-stage planetary geartrain
*Series-wound motor for plenty of power and fast line speed
*Remote control with 12' (3.7m) lead
*94' of 5/16" (28.6m of 8mm) diameter wire rope
*Backed by the full WARN Limited Lifetime Warranty

*Rated Line Pull: 8000 lbs. (3629 kgs) single-line

*Motor: 12v DC Series Wound 
*Electrical controls: Solenoid
*Remote Control: Remote switch, 12 ft. (3.7m) Lead
*Geartrain: 3-Stage Planetary
*Gear Ratio: 216:1
*Clutch (freespooling): Sliding Ring Gear
*Brake: Automatic Direct Drive Cone
*Drum Diameter/Length: 2.5 in./9.0 in. (6.4cm/23cm)
*Weight: 89lbs. (40.4kgs.)
*Wire Rope: 5/16 in. x 94 ft. (8mm x 28.6m)
*Fairlead: Roller
*Recommended Battery: 650 CCA minimum for winching
*Battery Leads: 2 gauge, 72" (1.83m)
*Finish: Powder coat over primer undercoating
*Speed: 29.0 ft/min at 0 lbs, 4.8 ft/min at 8000 lbs

$699.99 each

KING 2.5" Coilover Shocks, w/RES

SKU KING2514COR
This is the KING Brand of 2.5" diameter Coil Over Shock, with remote reservoir. These are the best and most quiet coil over shocks you can buy.
$449.99 each

JK Front Anti Rock Sway Bar

SKU SCE9900JKFA

This is the Currie brand FRONT AntiRock sway bar kit to fit a Jeep 2 or 4 door JK's. This is a great to add stability to your lifted Jeep JK. This is the type you leave connected all the time, on-road OR off-road.

$1,185.00 each

JK Ultimate Dana 30 CV Axle Set for Jeep Wrangler & Unlimited ('07 and up)

RCV Performance Ultimate CV Axles simply replace your Jeep JK's weak Dana 30 U-joint axle shafts with a high-strength constant velocity design.

Free

Champion Wheel

18537 Collier Ave.

Lake Elsinore CA 92530

$340.99 each

JK Pro-Crawler Front Bumper, 3/16th" Steel

Looking for a minimal, high-clearance, hard-core, off-road bumper for your JK?

Look no further. The River Raider Pro-Crawler Bumper offers the best departure-angle of any bumper on the market. Clean, lightweight and durable.

Available in a heavy-duty 3/16" Steel or a lightweight 1/4" Aluminum.

$215.00 each

JK 1.75" Budget Based L.T. System

The Rock Krawler Wrangler JK 1.75" Budget Based Long Travel System is the perfect starting place for JK owners looking to run 33 inch tall tires. We provide you with 1 3/4" of front end lift and 3/4" of rear lift for a much more level stance. We have also included front sway bar disconnects to improve front axle articulation for better off-road ability. This system will ride and handle like stock!

System Benefits:

  • 1 3/4 inches of front lift and 3/4 inches of rear lift for a more level look.
  • Front sway bar disconnects for improved off-road ability.
  • Allows for up to 33 inch tall by 12.5 inch wide tires.

System Includes:
(2) 1 3/4 inch front poly spring spacers
(2) 3/4 inch rear poly spring spacers
(1) pair of front sway bar disconnects, and detailed instructions.

NOTES!
* Remove front sway bar disconnects subtract $99 from the retail price.
** Can be used with factory shocks.

$899.99 each

Carbon Fiber Jeep JK Grille

Give your Jeep that truly custom look with the JK Carbon Fiber Grille. This grille is a direct replacement and can accommodate all of the stock lights your OEM grille has. The grille is made from the highest quality carbon fiber weave and encased in a clear resin. The grille is a single piece and has been expertly smooth to produce a high gloss shine and showroom quality finish.

Features:

  • Replaces OEM Grille
  • Showroom quality finish
  • Light weight carbon fiber construction
  • Same dimensions as OEM Grille

Notes:

  • Fits Jeep JK 2007-2013
$754.99 each

JK, Weld-In Sport Cage Kit, 2 Door

The River Raider Weld In Sport Cage Kit offers you the increased protection you want! The River Raider high quality kit strengthens the factory cage and allows the use of the factory trim and roll bar padding for a finished factory look. The kit retains the use of your factory front speakers with an innovative dash plate design. It's made from high grade 1.75" 1026 DOM tubing. Includes template and instructions with numerous pictures. Comes bare steel. Standard UPS Ground shipping.

$554.99 each

50" LED Light Bar w/Switch Kit

Why spend a fortune on your lighting?  It may not be able to take a shot from your 12 gauge, but it will handle anything the trail can dish out and it'll throw light like no other!  Don't be left in the dark.

$599.99 each

JK River Raider Expedition Snorkel w/Breather Hose Extension Kit

River Raider is proud to offer the all new Expedition snorkel kit for the JK Wrangler.  This River Raider exclusive cowl design for the JK Wrangler is similar to snorkel systems found on the military H1 Hummers.  The Expedition snorkel is the ultimate cold air intake system.  It offers excellent water crossing capabilities while allowing the use of almost any roof rack or windshield mounted lighting system on the market today.  This snorkel kit comes complete with stainless steel hardware, instructions, templates, everything you need to modify your factory air box into a sealed unit. The optional 18" extension can be cut to desired length.  All parts are formed from steel and come with a durable baked on powder coated finish.  Protect your investment and expand your Wranglers off-road capabilities today with the Expedition snorkel kit River Raider Off Road.

This snorkel system includes a breather hose extension kit that ties your factory breathers into the airbox to create a worry-free, sealed system!

$1,995.00 each

Ultimate IFS CV Axle Set for Jeep Liberty ('08-'12)

RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of your Jeep Liberty ('08-'12) IFS axle shafts.

Ultimate IFS CV Axles provide increased range of articulation for vehicles modified with a lift kit or long-travel suspension, and provide strength that original equipment axle shafts just can't match.

Even if you have big tires and big power there are no worries. While our patented Spherical Sealing Technology provides much greater resistance to punctures and tears than rubber CV boots.

Ultimate IFS CV Axles are low maintenance, and are backed with a "No Questions Asked" limited lifetime warranty. Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS.

Ultimate IFS CV Axles are race proven, and used by racers in XRRA, Off Road Racing, and the TORC series. Put the power down with confidence!

Axle set includes driver and passenger side axles, each fitted with a Super Duty Chromoly Dome-Mass Cage and Race with SST, and an Ultimate 930 Inboard CV Joint. Axle set comes prelubed, and includes a tube of RCV synthetic moly grease for future lubrication needs. Black oxide coating is standard. Optional nickel plating is available for extra corrosion resistance in salty environments.

Specifications:

Part Number: OEM Inner Spline: OEM Outer Spline: RCV Inner Spline: RCV Outer Spline Compressed Length: Warranty Voided
CVJIFS-KK Includes Left & Right Axle 30 30 30 30 Driver's Side: 25.125" Passanger's Side: 21.21875" Over 40" Tire
$269.99 each

JK Rig Rubbers, Graphic Edition, 2 Door

Add a little personality to your JK while protecting its paint and your investment.  Rig Rubbers Graphic Edition are designed to take the abuse your JK faces everyday.  Whether you're on the trail or at the mall, multiple layers of heavy duty vinyl will protect your JK from scratches, chips and pin striping.

Rig Rubbers Clear Edition is the perfect solution to protect your JK’s paint and your investment. Rig Rubbers are designed to take the abuse your JK faces everyday. Whether you’re on the trail or at the mall, multiple layers of heavy duty vinyl will protect your JK from scratches and chips.

Wash your JK once, install Rig Rubbers and you are protected 24/7. Rig Rubbers Clear Edition are practically invisible and they also help hide any existing scratches or blemishes you may already have. Rig Rubbers can be installed DIY style or you can have them professionally installed.

Once installed, your JK can be washed and waxed as usual, not that you like to wash your rig. Rig Rubbers will not fall off but can easily be removed when the time comes.

Trust Rig Rubbers and PRACTISE safe Jeeping.

$1,734.99 each

TJ Rubi-Crawler Auxillary Crawl Box For 42RLE

This reduction unit replaces the stock 42RLE tailhousing with a 6 gear planetary reduction box featuring a 2.72 low range. This is a true, bolt-in doubler that couples to the stock Jeep transfer case or an existing Atlas transfer case.

Ratio Possibilities:
 
Stock Transfer Case Functions:
 
  1. With the Rubicrawler installed in any Jeep, The Normal two wheel drive feature of your Jeep does not change. The city or rural road handling of your Jeep is the same as it was the day you bought the Jeep.
 
Stock Transfer Case Functions with the RubiCrawler in High Gear:
 
  1. Rubicrawler in high range and the transfer case in four wheel drive high range (all Jeeps). The gear ratio of the transmission does not change. This feature gives you power to all four wheels.
  2. Rubicrawler in high range and the transfer case in four wheel drive low range (non Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 2.72 times lower. This feature gives you power to all four wheels.
2a. Rubicrawler in high range and the transfer case in four wheel drive low range (Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 4.0:1 times lower. This feature gives you power to all four wheels.
 
Stock Transfer Case Functions with the RubiCrawler in Low Gear:
 
  1. Rubicrawler in low range and the transfer case in two wheel drive (all Jeeps). The final gear ratio with the transmission in any gear is reduced 2.72 times lower. This feature does not give you power to all four wheels, but provides slower speeds and more throttle response for easy trail use. The nice feature of this is that you have more torque and better handling.
  2. Rubicrawler in low range and the transfer case in four wheel drive high range (all Jeeps). The final gear ratio with the transmission in any gear is reduced 2.72 times lower. This feature give you power to all four wheels and provides a shift on the fly option for four wheel drive. The New Process transfer case can be shifted into high ratio on the fly; so if you’re in sand, mud or offroad trail and need power to all four wheels this is a great option. 
  3. Rubicrawler in low range and the transfer case in four wheel drive low range (non Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 7.40 times lower. This feature gives you power to all four wheels. This is an extreme crawl ratio that provides a slow controlled approach to an obstacle.
3a. Rubicrawler in low range and the transfer case in four wheel drive low range (Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 10.88 times lower. This feature gives you power to all four wheels.   This is an extreme crawl ratio that provides a slow controlled approach to an obstacle.
 
Ratio possibilities with a -
    Stock New Process 231/241 are a 2.72:1 and a 7.40:1
    Stock NP Rocktrac are a 2.72:1, 4.0:1 and a 10.88:1
    Atlas 2.0 are 2.0:1, 2.72:1 and a 5.44:1
    Atlas 3.0 are 2.72:1, 3.0:1 and a 8.16:1
    Atlas 3.8 are 2.72:1, 3.8:1 and a 10.44:1
    Atlas 4.3 are 2.72:1, 4.3:1 and a 11.70:1
    Atlas 5.0 are 2.72:1, 5.0:1 and a 13.60:1

 

$5,089.99 each

River Raider Armor Package, 2 Door JK

Take your 2 Door Jeep JK from stock to rock!  This complete package from RiverRaider Offroad allows you to keep a Low Center  of Gravity all while giving you the clearance you need to run 35" tires without having to alter your suspension in any way other than a simple 1 3/4" puck lift.  RiverRaider products are among the strongest products on the market, providing you with no bullshit protection for your Jeep where it's needed most.  

This kit comes standard with the following parts:

In addition to providing your Jeep with the heavy duty protection it needs to survive the toughest of trails, another nice feature of the included  skid plate system is that it will give you additional ground clearance (almost 1.75" better than stock).

Everything in this kit is designed to work with stock and aftermarket suspensions systems. 

 

RiverRaider Skid Plate (copyright JKOwners.com)

* Note all of the products in this package deal are discounted, saving you over $565.00 USD off MSRP!

$209.99 each

RiverRaider Dana 30 Diff Cover

Formed from 3/8'' plate steel these diff covers offer unparalleled protection. 
They feature: Grade 8 hardware, large fill plug, our signature skull, and cross bone insignia. 
They are fully welded inside and out, the mounting surface is then machined smooth. COMES BARE STEEL. 

The diff cover shown here is a Dana 30 powder coated, and the insignia sanded off to show the detail.

$1,099.95 each

CURRECTLYNC® JK WRANGLER HEAVY DUTY STEERING SYSTEM

The Currie Currectlync® heavy duty tie rod and drag link system for all models of Jeep JK Wrangler vehicles features 1 5/8" diameter 4130 chrome moly heat treated steel tubing tie rod and drag link tubes, 1 1/4" thread forged steel greasable tie rod ends, as well as new steering stabilizer shock bracket and u-bolt kit.

The massive tie rod ends thread into the tie rod end body so that they may 1) be replaced without replacing the whole rod end saving cost, 2) the same threaded in tie rod end is used at all 4 points so only one spare would have to be carried, and 3) they may be unscrewed from the rod end bodies and screwed in from the other side if a flipped tie rod and/or drag link was desired. Tie rod and drag link tubes feature wrench flats machined onto them and jam nuts for ease of adjustment. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary, and best of all, it's made in the U.S.A.!

NOTE 1: Flipping the tie rod or drag link would require retapering the tie rod end holes from the top side of the knuckle.

$499.99 each

JK Front Winch Bumper, 3/16th" Steel

SKU FBB8000

This is the most affordable Front Bumper for the Jeep JK from GenRight Off Road!

$599.99 each

JK Tube Flare, Front, 4" Wide, Aluminum

SKU TFF8720

Want to go with bigger tires? These flares open the wheel well to better clear 35" and larger tires.

FEATURES:

  • Made of lightweight & durable 6061 Aluminum alloy.
  • Bolts on in same location as stock flare.
  • 4" wide flare (same as stock).
  • Bigger wheel opening (up and rearward) to prevent tire rubbing.
  • 1/8" thick laser cut and CNC bent plate and tubes will hold up out on the trail.
  • Built from rugged 1-1/2" diameter x .188" wall tubing.
  • TIG Welded in a precision jig to assure a good fit.
  • Includes new hardware (some stock hardware is reused).
  • Retains your stock inner fender well.
  • Includes detailed installation instructions.
  • 100% made in USA!

NOTES:

  • Fenders are sold in pairs.
  • Sold un-painted.
  • LED Side marker light kits are also available.
  • Installation requires minor drilling of the factory mounting locations.
$899.99 each

JK Rear Tire Carrier, 1-3/4" Diameter Aluminum Tubing

SKU RTC3810

This is the new JK "Swing Out" rear tire carrier from GenRight Off Road.  It is sleek, simple and made of super light weight 6061-T6 Aluminum alloy.  It is designed to be completely independent of the rear bumper.

FEATURES:

  • Giant 1-3/4" diameter Aluminum alloy tubing.
  • 4 point mounting is rattle free.
  • Works independent from the rear bumper.
  • Swing out tube style design.
  • Mounts to factory rear door hinges.
  • 100% TIG welded Aluminum (as pictured)!
  • Designed to hold up to a 42" tire.
  • Fits any bolt pattern or wheel offset (not stock). 
  • Corrosion resistant. 
  • Fits tighter to the rear tailgate than other swing out tire carriers.
  • Improves departure angle.
  • License plate re-location mount.
  • Cover for factory license plate location.
  • Pre-drilled for license plate and 3rd brake light wiring.
  • Made in USA!

NOTES:

  • Sold un-painted.
  • Requires drilling holes on drivers side to mount the latch plate.
  • Requires that the factory rear door hinges be removed and new GenRight pivot points installed (no new holes required).
  • If using the factory tail lights the tire carrier brackets may have to be modified to clear (simple trim to clear). 
  • This tire carrier is also available in a less expensive Steel version (RTC-3800).

 

$5,249.99 each

Currie Rock Jock 60 Axle, REAR

This is a complete Currie Rock Jock 60 REAR Axle from GenRight Off Road. We stock this axle in a configuration that we know works best for Jeep guys on 37" to 42" tires.

We figured out a long time ago that new axles built from scratch are the way to go! You get a hi-pinion in the rear which keeps the driveshaft tucked up and out of harms way out on the trail! All the geometry (pinion angle) is correct and the rear brakes are mounted in the proper position (so they are easy to bleed)!

Currie uses REAL full size Dana 60 ring and pinions. 35 spline axles that are 1-1/2” diameter and super thick axle tubes. We order all axles with no brackets so they get welded on by you in the proper location that is specific to your vehicle!

These axles are also manufactured with a rotated diff cover to prevent leaking from damage on the trail.

STANDARD SPECIFCATIONS:

  • 65" wheel mounting surface to wheel mounting surface.
  • Locker Type: Air (ARB).
  • 5.38 Gear Ratio (Super 60).
  • Hi-Pinion. 
  • Disc Brakes (new rotors and calipers).
  • 5 on 5-1/2 bolt pattern only.
  • 1-1/2" diameter 35 spline axles.
  • Semi Float.
  • Machined Diff case is tapped to mount the Currie rear bridge, included.
  • Super thick axle tubes.
  • Super thick Diff cover.
  • 1350 Yoke.
  • No control arm brackets.
$1,495.00 each

Ultimate Dana 60 CV Axle Set for Currie RockJock (Upgrade)

RCV Performance Ultimate CV Axles simply replace your Currie RockJock Dana60, with a high-strength constant velocity design.

$665.00 each

JK (2007-2011) Front 1350 C.V. Heavy Duty Drive Line, 2 or 4 Door w/ Manual Transmission

If your JK is lifted more than 2" and/or you are running larger tires it is best to replace the factory "junk" driveshafts. The factory driveshafts are a boot'd CV style and the increased driveline angle with split the boot and the joint will run dry!!! These heavy duty driveshafts will not as they are good to 32 degrees.

The J.E. Reel Front 1350 C.V. Heavy Dut driveshaft is designed for stock to 6” lift applications and is rated for up to a 37” tire.

*O.E. manufactures spend countless millions of dollars and countless man hours in R&D to make sure their vehicles perform trouble free. Any changes to suspension, gear ratio, tire size and/or other modifications add additional stress and wear and tear to these vehicles and adversely affects both reliability and ride comfort. Vehicles can have problems associated with these modifications. J.E. Reel Drive Line Specialists is not responsible for any problems occurred due to installations or modifications to any vehicle.

NOTES: 
  • Other configurations are also available.
  • All drive shaft kits require special "inch" torque wrenches to install the new yokes on the axle side.
$199.99 each

JK Slider Bar DIY Kit, 4 Door, Steel

SKU RCG8400 

This is a "slider" side bar kit that can be added on to the standard rocker guard on a factory Rubicon 4 door Jeep JK.

This is a great upgrade for anyone looking to add on a "functional" step to their JK. Although this kit does reinforce the factory side protection it is only good for medium duty trail protection of the body.

FEATURES: 

  • Can be welded onto factory Rubicon rocker guard bar under the doors.
  • Full coverage from front to rear (protects the flares too). 
  • Side bar ends are mitered (cut) at 15 degrees to angle the bar up slightly.
    Constructed of tough 1-1/2" diameter x 1/8" thick wall steel tubing.
  • Dimple die'd step plates provide good foot traction and good drainage.
    Sold in pairs (as a kit).
    Shipped un-painted and requires paint or powder coat after installation. 

NOTE: Although the dimple die'd steps provide good foot traction in most conditions, the metal tubing can be slippery when wet, therefore we recommend adding grip tape where necessary for better entry and exit foot traction.

 

$1,349.99 each

TJ / LJ / YJ COMP Stretch Package

SKU COMPPKG 

This is the GenRight COMP Stretch Package to stretch your wheelbase up to 7" for a Jeep TJ or YJ.

We have taken all the guess work out of what you need - This package was designed to give you everything you need to stretch your Jeep cleanly.

This Kit Includes: 

You should also consider the following parts: 

  • Our Rear 4 link suspension kit (R4LINKKIT)
  • Our outboard rear shock mounts (RSM1001)
  • Coil over shocks, since you will need to relocate the spring & shock anyway (KING)
  • Our rear sway bar, better road manners (SWB1003)
  • License Plate relocation bracket, it is a good time to move the license plate while installing new corner guards (RH40071)
  • LED Tail lights, a nice upgrade while you are at it (LED1200)

 

$1,399.99 each

JK Extended Range Dual Gas Tank

SKU GST8202-2

Never hassle with transporting and transferring gas from gas cans again with the GenRight JK Extended Range additional tank!

$5,299.95 each

JK 3.8L Supercharger Kit, V3 Si-Trim Stage 2 Intercooled, 288 lb ft of Torque, 260 hp (at the rear wheel, dyno'd on 37" Tires)

Key Features:

 

  • Designed for the 2007-2011 Jeep Wrangler JK
  • Easy to install with less time and hassle than our competitors
  • 100% Check Engine Light free environment
  • Most powerful kit on the market
  • Self Contained V3 Si-Trim Supercharger
  • Add's 2-6MPG when drive respectfully*
  • Can be used with an Off Road Snorkel


Most notably should something ever go wrong with any mechanical part of the RIPP Supercharger kit, simply remove the longer serpentine belt supplied and powering the SDS, and reinstall your factory belt which takes minutes and your completely back to stock. This also comes in handy if you live in a state that require stringent emissions testing, simply take the SDS out of the loop and your back to stock. You will not have to reverse any other part of the fuel or electronics to do this, A FEATURE NONE of our competitors can boast.

Power, Drivability, and, Reliability: these three words sum up RIPP Superchargers. It will deliver a smooth and linear boost curve that does not shock the system the way a turbocharger or roots type system would. RIPP’s unique approach to product development brings together a system with the level of refinement that your Jeep has been waiting for. Pumping new life into the veins of your vehicle with every revolution! The power added will bring out V8 like performance when you need it.

*Tested on stock wheels and tires with stock gearing, no extra gear and driven within the compounds of the speed-limit. Most end users are attesting to 2-6 more miles per gallon on average.

US Customers:  THIS SYSTEM IS CARB Approved and SMOG Legal for US in California Public Roads.

$1,749.99 each

JK Rubi-Crawler Auxillary Crawl Box For 42RLE

This reduction unit replaces the stock 42RLE tailhousing with a 6 gear planetary reduction box featuring a 2.72 low range. This is a true, bolt-in doubler that couples to the stock Jeep transfer case or an existing Atlas transfer case.

Ratio Possibilities:
 
Stock Transfer Case Functions:
 
  1. With the Rubicrawler installed in any Jeep, The Normal two wheel drive feature of your Jeep does not change. The city or rural road handling of your Jeep is the same as it was the day you bought the Jeep.
 
Stock Transfer Case Functions with the RubiCrawler in High Gear:
 
  1. Rubicrawler in high range and the transfer case in four wheel drive high range (all Jeeps). The gear ratio of the transmission does not change. This feature gives you power to all four wheels.
  2. Rubicrawler in high range and the transfer case in four wheel drive low range (non Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 2.72 times lower. This feature gives you power to all four wheels.
2a. Rubicrawler in high range and the transfer case in four wheel drive low range (Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 4.0:1 times lower. This feature gives you power to all four wheels.
 
Stock Transfer Case Functions with the RubiCrawler in Low Gear:
 
  1. Rubicrawler in low range and the transfer case in two wheel drive (all Jeeps). The final gear ratio with the transmission in any gear is reduced 2.72 times lower. This feature does not give you power to all four wheels, but provides slower speeds and more throttle response for easy trail use. The nice feature of this is that you have more torque and better handling.
  2. Rubicrawler in low range and the transfer case in four wheel drive high range (all Jeeps). The final gear ratio with the transmission in any gear is reduced 2.72 times lower. This feature give you power to all four wheels and provides a shift on the fly option for four wheel drive. The New Process transfer case can be shifted into high ratio on the fly; so if you’re in sand, mud or offroad trail and need power to all four wheels this is a great option. 
  3. Rubicrawler in low range and the transfer case in four wheel drive low range (non Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 7.40 times lower. This feature gives you power to all four wheels. This is an extreme crawl ratio that provides a slow controlled approach to an obstacle.
3a. Rubicrawler in low range and the transfer case in four wheel drive low range (Rubicon Jeeps). The final gear ratio with the transmission in any gear is reduced 10.88 times lower. This feature gives you power to all four wheels.   This is an extreme crawl ratio that provides a slow controlled approach to an obstacle.
 
Ratio possibilities with a -
    Stock New Process 231/241 are a 2.72:1 and a 7.40:1
    Stock NP Rocktrac are a 2.72:1, 4.0:1 and a 10.88:1
    Atlas 2.0 are 2.0:1, 2.72:1 and a 5.44:1
    Atlas 3.0 are 2.72:1, 3.0:1 and a 8.16:1
    Atlas 3.8 are 2.72:1, 3.8:1 and a 10.44:1
    Atlas 4.3 are 2.72:1, 4.3:1 and a 11.70:1
    Atlas 5.0 are 2.72:1, 5.0:1 and a 13.60:1

 

$49.99 each

Tree Saver, 10 FT, 26,500LB MBS Strap

This 10FT tree saver strap is rated a 26,500 LBS (Minimum Break Strenghth) and is a great way to use mother nature as a tow point without hurting or damaging the tree. These straps are all made in Canada using the highest quality Canadian made materials designed for the Recovery industry.

*Note, images shown include Tow Straps and Shackles that are sold separately.

$729.99 each

Warn VR8000-s Winch With Synthetic Rope

A full 8,000 lb. pulling capacity makes this winch great for lighter trucks, Jeeps, and SUVs.  Quick line speed, durable construction, and WARN dependability ensure this winch will come through time and time again.

Features:

*Legendary WARN reliability and performance; 8,000 lb. (3630 kg) capacity
*Low-profile design will fit most trucks and SUVs
*Separate control pack for various mounting options
*Exclusive brake design for superior winching control
*Durable, smooth, and reliable three-stage planetary geartrain
*Series-wound motor for plenty of power and fast line speed
*Remote control with 12' (3.7m) lead
*100' (30m) of WARN Spydura synthetic rope
*Backed by the full WARN Limited Lifetime Warranty 

*Rated Line Pull: 8000 lbs. (3629 kgs) single-line
*Motor: 12v DC Series Wound 
*Remote Control: Remote switch, 12 ft. (3.7m) Lead
*Geartrain: 3-Stage Planetary
*Gear Ratio: 216:1
*Clutch (freespooling): Sliding Ring Gear
*Brake: Automatic Direct Drive Cone
*Drum Diameter/Length: 2.5 in./9.0 in. (6.4cm/23cm)
*Weight: 62 lbs. (28.12 kgs)
*Rope: WARN Spydura synthetic -- 100', 3/8" diameter (30m, 9.5mm diam.)
*Fairlead: Full radius polished aluminum hawse
*Recommended Battery: 650 CCA minimum for winching
*Battery Leads: 2 gauge, 72" (1.83m)
*Finish: Powder coat over primer undercoating
*Speed: 29.0 ft/min at 0 lbs, 4.8 ft/min at 8000 lbs

$799.99 each

KING 2.5" Coilover Shocks, w/Clicker RES

SKU KING25COCRES
 
This is the KING Brand of 2.5" Coil Over Shock, with clicker remote reservoir. This is s great upgrade to allow the driver to change the shocks compression without disassembling the shock (as done at a shock tuning day).
$499.99 each

JK Rear Anti Rock Sway Bar, 2 Door

SKU SCE9900JKR4

This is the Currie brand REAR AntiRock sway bar kit to fit a Jeep 4 Door JK. This is a great to add stability to your lifted Jeep JK. This is the type you leave connected all the time, on-road OR off-road.

$1,999.99 each

JK CrMo Hi Steering Kit, Dana 44

SKU STK8000

This is the GenRight "JK" Hi-Steer (Drag Link, Tie Rod and knuckles) kit. It is THE fix for any JK with the stock Dana 44 front axle as it includes 2 new Reid Racing Hi-Steer Knuckles.

$1,585.00 each

JK Ultimate Dana 44 CV Axle Set for Jeep Rubicon ('07+) with 300M Inner Shafts

SKU CVJ44-JK-300M

RCV Performance Ultimate CV Axles simply replace your Jeep JK's weak Dana 44 U-joint axle shafts with a high-strength constant velocity design. Tests prove Ultimate CV Axles to be twice as strong as OEM Jeep JK shafts, and they're just as tough at a straight angle as they are at extreme angles where U-joints are weakest. We have gone a step further by upgrading the inner shafts to 300M, which provides an even greater tolerance to stress.

$1,285.00 each

JK Ultimate Dana 30 30T CV Axle Set for Jeep Wrangler & Unlimited ('07+)

RCV Performance Ultimate CV Axles simply replace your Jeep JK's weak Dana 30 30T U-joint axle shafts with a high-strength constant velocity design.

$999.99 each

Carbon Fiber Jeep JK Hood

Reduce the overall weight on your Jeep JK while taking it to the next level with the GenRight carbon fiber hood. The hood reuses all of the mounting hardware on your OEM hood with pre-drilled holes for easy installation. The hood is made from the highest quality carbon fiber weave and encased in a clear resin. It is a single piece and has been expertly smooth to produce a high gloss shine and showroom quality finish. Replace your stock hood with something that will really stand out and give you that aftermarket look!

Features:

  • Lightweight carbon fiber construction
  • Single piece of carbon fiber
  • pre-drilled holes for OEM hardware

Notes:

  • Compatible with Jeep JK 2007-2013 models
$799.99 each

JK, Weld-In Sport Cage Kit, 4 Door

The River Raider Weld In Sport Cage Kit offers you the increased protection you want! The River Raider high quality kit strengthens the factory cage and allows the use of the factory trim and roll bar padding for a finished factory look. The kit retains the use of your factory front speakers with an innovative dash plate design. It's made from high grade 1.75" 1026 DOM tubing. Includes template and instructions with numerous pictures. Comes bare steel. Standard UPS Ground shipping.

$199.99 each

50" Light Brackets for JK

The  JK Light Bar Mounts allow you to easily install a 50" LED Light Bar above your windshield.  The Light Bar Mounts are manufactured using 3/16" thick steel, laser cut and formed using a CNC precision press brake.  

They are designed as one piece construction with no weld seams for a smooth finished cosmetic look.  No drilling or other modification is necessary for installation, they simply bolt to the windshield mounts using existing hardware.

Precision cut Rubber Gasket liners are included with the light bar mounts to protect your vehicles paint from scuffing.  Another unique feature with this Light Bar Mount is the ability to hide the LED light wiring by running it behind the bracket.  All brackets are finished complete with E-Coating &  Black Fine Texture Powder Coating for superb corrosion resistance.  This bracket fits a JK Wrangler 2007-Present.

$689.99 each

JK River Raider Cast Snorkel w/Breather Hose Extension Kit

Cross with Confidence! The River Raider Snorkel prepares you for the toughest terrain and deepest mud holes. Our aluminum construction, instead of cheap plastic, means it is going to last and take all the abuse the trail will dish out. Its high flow design means your jeep can breath better and run cooler. The complete kit comes with heavy duty ducting from the factory air box and stainless steel hardware. Complete installation instructions included.

This snorkel system includes a breather hose extension kit that ties your factory breathers into the airbox to create a worry-free, sealed system!